Anvil Bullet Mirrors for Camaro Complete Set (Taller Stem) - Pair
Anvil Bullet Mirrors for Camaro Complete Set (Taller Stem) - Pair
Anvil Bullet Mirrors for Camaro Complete Set (Taller Stem) - Pair
Anvil Bullet Mirrors for Camaro Complete Set (Taller Stem) - Pair
Anvil Bullet Mirrors for Camaro Complete Set (Taller Stem) - Pair
Anvil Bullet Mirrors for Camaro Complete Set (Taller Stem) - Pair

Anvil Bullet Mirrors for Camaro Complete Set (Taller Stem) - Pair

100318

Regular price $1,000.00
/
Shipping calculated at checkout.

Only 0 items in stock!

Our newest addition to our bullet mirror line up. These bullet mirrors are taller than our original design, about 1 inch taller. These are perfect for G-body, X-body, and C3 Corvettes. 

Complete set include:

  • 2 x mirror housings
  • 2 x mirror guts
  • 2 x mirror trim bezels
  • 2 x rubber gaskets

Bullet Mirror Housings 
GM Bullet Mirrors are designed as universal replacements to your stock mirrors. Our Mirrors are Fiberglass or Carbon Fiber, the factory mounting bracket and set screw are not used to install our mirrors, rather we devised a special bracket that gets rid of the unsightly set screw. Our mirrors come with rubber gaskets that go between the base and the surface of your car door.


Bullet Mirror Guts
Our GM Bullet Mirror Glass includes the Friction Ball Joint, Aluminum L Bracket and Stainless Steel Hardware. 


The Mirror Glass can be installed on Anvil or Original GM Bullet Mirrors.

Fitment: For all other Vehicle models beside GM, a light sanding to the Bullet Mirror's base will shape it to your vehicle's profile for a perfect fit.

Bullet Mirror Bezels
Our Bullet Mirror Bezels are CNC'd Aluminum and designed to finish off the raw edge on your Bullet Mirrors. Bezels are sold in sets of Left and Right. 

You can run a bead of Epoxy or E6000 on the inside edge of your Bullet Mirror and push these Bezels into place. With stock, or our Carbon Fiber mirrors, you'll want to sand down the inside edge to give the epoxy a tooth for a firm grip.

Bullet Mirror Brackets
You will run a bead of Epoxy (we recommend JB Weld) on the inside edge of your Bullet Mirror Stem and push these Brackets into place. You'll want to sand down the inside edge on the Bullet Mirror Stem to give the epoxy a tooth for a firm grip.

*Note: Bullet mirror complete set comes disassembled. May interfere with opening of vent windows if your car comes equipped with them.

See our assembly video:


Specifications:
Forged Carbon Fiber pattern may vary from part to part
Fiberglass with primer finish must be trial fitted, block sanded, and prepped before painting