1969 Camaro Wide Inner Fenders - Left and Right
101711
Regular price $2,600.00Our 1969 Camaro Inner Fenders Replace your stock steel original inner fenders with our lightweight Deep Tub composite Inner Fenders. These inner fenders are Custom designed to allow for more tire clearance while looking better than the factory originals while cutting weight off the front end of your car.
Our inner fenders aren’t any wider in total width than stock, rather the shape is altered. The surface is brought out on either side of where they mount to the fenders in the engine bay before they go back down to the stock areas inside and out. This design change is what allows for a tire fitment of up to 315mm, depending on your subframe and suspension.
Our Deep Tub Inner Fenders require our Inner Fender Extensions if you're using our Wide Body outer Fenders.
| Specifications: |
|---|
| Forged Carbon Fiber pattern may vary from part to part. |
| Front Tire Fitment is 315mm (12.40 Inch) with no rubbing, depending on your aftermarket subframe, suspension set up and wheel offset. |
| Fiberglass with primer finish must be trial fitted, block sanded, and prepped before painting |
| NOTE: This product is for off-road or show use only and is not meant to be used on cars that are driven on public roads. |
- You may cancel your pre-order at any time for a full refund before the order ships. Simply click on the "View your order" button in your order confirmation email.
- The current estimated shipping times* will vary from product to product. Please contact us for more information on lead times.
- Regardless of which option is selected, "Full Deposit" or "50% Deposit", no priority is given to the "Full Deposit" option over the "50% deposit" option.
- Once stock becomes available to fulfill part or all of your order, we will send an email to the email address we have on file for you. This email will include information about the status of your order and any remaining balance that may be due.
- If there is a remaining balance due on your order, you will have 2 weeks from the date of the email to pay the balance. If you fail to pay the balance within this time frame, your order will be cancelled and a refund will be issued to your original payment method.
- If your pre-order is marked as pick-up, you will recieve an email once your pre-order is ready for pick up, and you will have 2 weeks to pick up your order from the date of the email. If your pre-order is not picked up within the 2 weeks from when you where notified, your pre-order will be canceled and a refund will be issued.
- In the event that we are unable to refund your original payment method, we will issue a check and send it to the billing address on file for your order.
We appreciate your business and look forward to fulfilling your pre-order. If you have any questions or concerns, please don't hesitate to contact us.
*Some items marked as pre-order may become available sooner or later than the current shipping date given when contacting us. Estimated shipping times are based on the current production and shipping cycle and are subject to change without notice.
Definition of Terms Used in Warranty Policy
- Composite Parts: Composite parts refer to but not limited to forged carbon fiber, carbon fiber, carbon fiber/fiberglass hybrids, and fiberglass.
- Clear Coat: The transparent, protective layer applied to the surface of composite parts to enhance their durability and appearance. The clear coat provides resistance against environmental elements such as UV radiation and abrasion.
This is a conditional warranty. Anvil Auto Inc. warrants all our products to be free of defects in material and workmanship for a period of one year from the date of shipment. Not covered under this warranty is improper assembly, installation, maintenance, use, modifications, normal wear and tear, or storage. Any product deemed to be defective by Anvil Auto Inc. and returned to Anvil Auto Inc. within one year of the date of shipment will be repaired or replaced at the sole discretion of Anvil Auto Inc. Anvil Auto Inc. does not assume any financial responsibility for the actual costs incurred for the removal and replacement labor, freight/shipping costs, if any, nor for any incidental expenses or consequential damages that may be incurred. The expressed limit of Anvil Auto Inc.'s liability for warranty claims is limited by the original sales price of the product, as evident by the original purchase order and invoice from Anvil Auto Inc., and is not transferable when the product is sold by the original buyer.
All products sold by Anvil Auto Inc. are aftermarket products and are intended for off-road or show use only. Anvil is not liable for any damages or injury as a result of these products. Due to strict regulations by the Department of Transportation, some of these products are not approved for street/highway use. Removal of reinforcements, bumpers, turn signals, and other safety equipment on the vehicle is the responsibility of the buyer. We will not be responsible for your own actions.
Because of the hand made nature of Anvil Auto Inc. parts, there may be very slight surface imperfections on the clear coat or the carbon fibers, such as tiny pin holes, slight distortion or coloration in the carbon weave, or minor loose fibers that are deemed acceptable. Every part is inspected before it leaves our warehouse and we do not ship parts that do not meet our stringent quality standards unless otherwise disclosed.
In rare instances where remnants of rubbing compound from production appear, simply remove by rubbing with a soft dry cloth. If areas become dull, restore shine by polishing with a clean dry soft cloth and rubbing compound.
Anvil Auto Inc. requires the use of hood pins on all composite part hoods. Anvil Auto Inc. shall not be held liable for any damages to the product and/or vehicle caused by not properly using hood pins. Please note that Anvil Auto Inc. does not recommend re-installing gas/spring hood shocks, dampers, and/or struts. Damages to the hood that result from the use of gas/spring struts will not be covered under warranty.
Anvil Auto Inc. Fitment Guarantee
Please note that due to the handmade nature of our composite parts, minor alterations may be necessary for an ideal fit. All composite parts are therefore unique and any alterations needed, if any, shall be performed by the buyer to their satisfaction before installation.
All products require professional installation. Buyer understands that some products may require modifications for correct fitment. Minor adjustments may be necessary as part of the normal installation process.
Anvil Auto Inc. has made an effort to produce all its aftermarket products to fit as closely as possible to OEM parts. However, some occasional prepping may be necessary for an ideal fit. The buyer needs to perform these steps to their satisfaction before installation. If the buyer wishes to paint the products, they must pre-fit the parts to the vehicle before painting to ensure proper fit. There are absolutely no returns on painted products. It is also important for the buyer to note that any modifications or adjustments made to the products during installation are done at the buyer's own risk. Anvil Auto Inc. shall not be held liable for any damage, injury, and/or labor cost resulting from such modifications or adjustments.
Anvil Auto Inc. does not guarantee part fitment on vehicles that have been involved in accidents, have had or currently have body damage, have been previously modified, and/or using other aftermarket products not sold by Anvil Auto Inc.
Anvil Auto Inc.1-year Clear Coat Guarantee
All of Anvil Auto Inc. forged carbon, carbon fiber, and carbon fiber / fiberglass parts are coated with a UV protective clear coat. Our warranty policy covers the clear coat on all forged carbon, carbon fiber, and carbon fiber / fiberglass for one year from the date of shipment. Please note that due to the handmade nature of our composite parts, minor imperfections may occur and shall not be covered under our one year warranty. Not covered under Anvil Auto Inc. 1-year clear coat guarantee is improper maintenance, storage, modifications such as painting, or normal wear and tear.
